Wet or Dry?  Dry core bits are designed to operate at higher RPM's than wet core bits. All dry core bits sold by Braxton-Bragg can be used wet by simply reducing the RPM. 

To get the best performance and longevity, read and follow the manufacturer's RPM recommendations.

Do you need to drill small holes in porcelain, glass or granite tile?  Look no further.  Raimondi ProBits are the best drill bits that we have found for these materials.


Talon Platinum Dry Core Bits

Talon Platinum Dry Core Bits

You can core a hole in only 30 seconds with Talon™ Platinum Core Bits. Using the recommended speeds (10,000 RPM for Talon™ Platinum Dry and 3,000 RPM for Talon™ Platinum Wet Core Bits), allows the bit to cut through granite in just half a minute, leaving a smooth hole with little to no chipping. 

This incredible cutting speed is produced by using the best-suited bond to the application. In a wet environment, using a water-fed tool at 3,000 RPM will produce the best cutting speed and cleanest result. 

For the best results in dry conditions, 10,000 RPM is recommended. This high RPM will keep the diamonds and bond cool and allow the core bit to do all the work.

  • Sets a new standard for dry core bits
  • No drill press required
  • 10,000 suggested RPM
  • Available in 1", 1-1/4", 1-3/8", 1-1/2", 1-3/4", and 2" diameters

Talon Platinum Wet Core Bits

Talon Platinum Wet Core Bits

  • Very fast, outstanding life
  • Designed for freehand use
  • 3,000 suggested RPM
  • Available in 1", 1-1/4", 1-3/8", 1-1/2", 1-3/4", and 2" diameters

Talon Thin Wall Diamond Wet Core Bits

Talon Thin Wall Diamond Wet Core Bits

  • Wet use only
  • Fast and long lasting
  • Designed to handle your toughest coring applications quickly, efficiently and economically
  • Very aggressive in a wide range of applications
  • Designed for use on both natural and engineered stone
  • Ideal for use on porcelain tile as well
  • Recommended for use at 4,000 RPM
  • Available in the following sizes:
    • 1/4" x 3-3/4" x 5/8-11 Thread
    • 5/16" x 3-3/4" x 5/8-11 Thread
    • 3/8"x 3-3/4" x 5/8-11 Thread
    • 1/2" x 3-3/4" x 5/8-11 Thread
    • 3/4" x 3-3/4" x 5/8-11 Thread
    • 1" x 3-3/4" x 5/8-11 Thread
    • 1-1/4" x 3-3/4" x 5/8-11 Thread
    • 1-3/8" x 3-3/4" x 5/8-11 Thread
    • 1-1/2" x 3-3/4" x 5/8-11 Thread 
    • 1-3/4" x 3-3/4" x 5/8-11 Thread
    • 2" x 3-3/4" x 5/8-11 Thread
    • 2-1/2" x 3-3/4" x 5/8-11 Thread
    • 3"x 3-3/4" x 5/8-11 Thread 

Talon Thin Wall Core Bits for Radial Arm Machines

Talon Thin Wall Core Bits for Radial Arm Machines

Use Talon Thin Wall Core Bits on your Radial Arm machine with a 1/2 gas adapter.

Fabricators love our Talon Thin Wall Core Bits, so we went searching for a similar core bit with a bond suitable for CNC machines.

Length consideration, zero blowout and spindle speed testing all went into consideration.

After months of testing, we have found that our Talon CNC Thin Wall Bits have no match. Try them and see for yourself!

  • Drill very fast with no blowout
  • Designed for use on all types of CNC machines
  • Use on Radial Arm machines
  • Superior quality bits 
  • 1/2 gas thread 
  • Aggressive
  • 5 segments 
  • Works great on all types of natural & engineered stone 
  • 20mm diam, 40mm length
  • Available in the following sizes:
    • 1" x 3-3/4" x 1/2 Gas Thread
    • 1-1/4" x 3-3/4" x 1/2 Gas Thread
    • 1-3/8" x 3-3/4" x 1/2 Gas Thread
    • 1-1/2" x 3-3/4" x 1/2 Gas Thread 
    • 2" x 3-3/4" x 1/2 Gas Thread
    • 2-1/2" x 3-3/4" x 1/2 Gas Thread
    • 3" x 3-3/4" x 1/2 Gas Thread