Small Blades are typically used on a grinder or a circular saw.  Blades are designed for specific application and materials.  Proper guarding and eye protection is strongly recommended. 

Most of these blades can be used dry or wet; look at each description to see the recommended RPM. 

For optimum speed and product life, soft bond blades are used for hard material such as granite and hard bond blades are used for soft material like marble. 

Turbo Blades are ideal for fast cutting and with little chipping. Turbo blades can be used wet or dry, making them versatile for use on the job site or in the shop.

Turbo blades have different cutting characteristics determined by diamond quality, segment height and segment spacing.


Talon™ Diamond Turbo Saw Blades

Talon Diamond Turbo Saw Blades

Talon Turbo Blades are a great balance of price and performance. Talon Turbo Blades compare to blades at twice the cost, and leave a superb cut, with minimal chipping while providing an aggresive cut. A long-time industry favorite, the addition of quad holes makes this fantastic blade even more versitile. Using the Talon Turbo Blade with a flush cut or quad adapter will allow you to get into tight spaces, such as sink corners or clean up.

The Talon Turbo Blade is perfect for sculpting hard stone and making intricate cuts and removing material.

  • Closely spaced segments provide clean, chip-free cutting
  • High diamond concentration & quality for extended life
  • Dry or wet use
  • Use on grinders or circular
  • Cooling holes extend life by cooling blade core
  • Quad hole allow for inside corner cut & clean up & notching
  • Ideal for straight cuts on granite, marble & other natural & engineered stone
  • Available in:
    • 4" x 7/8"-5/8" Arbor, 15,500 RPM Max
    • 4-1/2" x 7/8"-5/8" Arbor, 13,300 RPM Max
    • 5" x 7/8"-5/8" Arbor, 12,000 RPM Max
    • 6" x 7/8"-5/8" Arbor, 10,185 RPM Max
    • 7" x Diamond Knock Out, 5/8" Arbor, 8,500 RPM Max

Talon™ AX Diamond Saw Blades

Talon AX Diamond Saw Blades

Talon AX Turbo Bladeshave diamond quality and quantity which allow these blades to cut smoothly through the hardest stones, leaving the cut free of chips.  The Talon AX Turbo blade cuts smoothly because of the segment style that has teeth placed close together. With other blades this could mean sacrifice of cutting speed, but not with Talon™ AX Turbo blade. It uses the correct bond that balances smooth cut with an aggressive cutting speed.

This blade may be used dry or wet.

Since it’s free–cutting, the Talon AX Turbo also reduces user fatigue, helping in production and extending tool life.

Talon AX represents the latest technology in diamond turbo blades.

  • Layered diamond technology
  • Closely spaced segments provide clean, chip-free cutting
  • High diamond concentration & quality for extended life
  • Bond designed to release diamonds when exhausted to provide the best cutting
  • Dry or wet cutting
  • Cooling holes extend life by cooling blade core
  • Quad hole allow for inside corner cut & clean up & notching on sizes 4”, 4-½”, 5”, 6” 
  • Ideal for straight cuts on granite, marble & other natural & engineered stone
  • Available in:
    • 4" x 5/8" w/ Quad Holes, 13,700 RPM Max
    • 4-1/2" x 5/8" w/ Quad Holes, 13,300 RPM Max
    • 5" x 5/8" Quad Holes, 12,000 RPM Max
    • 6" x 5/8" w/ Quad Holes, 10,000 RPM Max
    • 7", 8,700 RPM Max


Talon™ Thin Turbo Blade for Stone and Tile

Talon Thin Turbo Blade for Stone and Tile

Talon Thin Turbo Blades cut extremely clean and fast. Talon are the top of the line products, balancing exeptional quality, price and innovation. Use the Thin Turbo Blade to cut medium to hard stone. These blades may be used dry or wet.

Talon Thin Turbo Blades have a very thin rim for precise cutting and the core is built up to prevent the blade from flexing.

Talon Thin Turbo Blades can be used with a grinder, but are ideally suited for a small saw, like the Hercules® or Makita® saws.

  • Cuts granite, marble and tile
  • Has execptionally smooth cut
  • Bond designed for cutting speed and to provide chip free cutting
  • Ideal for Straight Cutting on Granite, Porcelain, Floor Tile & Other Hard Natural & Engineered Stone
  • Wet or Dry use (8" and 10" blades are for Wet use only)
  • Available in:
    • 4" x 5/8" Arbor, 14,200 RPM Max
    • 4-1/2" x 5/8" Arbor, 13,300 RPM Max
    • 5" x 5/8" Arbor, 12,000 RPM Max
    • 7" x Diamond Knock Out, 5/8" Arbor, 8,500 RPM Max
    • 8" x Diamond Knock Out, 5/8" Arbor, 7,500 RPM Max
    • 10" x 1", 5/8" Arbor, 6,000 RPM Max

Talon™ Side Cut Diamond Saw Blades

Talon Side Cut Diamond Saw Blades

The Talon™ Side Cut Blade is designed with teardrop-shaped side segments and impregnated with diamonds on each side of the blade, making it the our best blade for making precision straight cuts. The Talon™ name always mean superior quality.

Talon™ Side Cut blade can be used with a grinder or saw, and can be used wet or dry.

The Talon™ Side Cut blade's diamonds on the side do more than provide a clean cut; it prevents the stone from wearing the segment prematurely at the weld between the core and segment. This design helps to keep the segment in place and allows it to be used to core. 

The Talon™ Side Cut works great for cutting bowls on granite, marble and other natural stones.

  • Additional diamonds on the core to prevent premature wearing
  • Additional diamond segment on both sides of blade give added benefit of cutting smooth & chip-free
  • Fast cut
  • Dry or wet cutting
  • Can be use for side grinding, reach tight corners
  • Ideal for hard granite and hard natural stone
  • Available in:
    • 4", 13,700 RPM Max
    • 4-1/2", 13,300 RPM Max
    • 5", 13,200 RPM Max
    • 7", 8,500 RPM Max

Talon™ Slot Rim Blades for Stone and Tile

Talon Slot Rim Blades for Stone and Tile

Designed to be used wet or dry (except the 8" & 10" sizes) and can be used to cut multiple types of materials: marble, granite, engineered stone, natural stone, tile, and porcelain.

Use with a Tile Cutter to make final cuts on countertops and back splashes on the jobsite.

  • Wet or Dry use (8" and 10" blades are for Wet use only)
  • Available in:
    • 4", Wet or Dry, 14,200 RPM Max
    • 4-1/2", Wet or Dry, 13,000 RPM Max
    • 5", Wet or Dry, 12,000 RPM Max
    • 6", Wet or Dry, 10,000 RPM Max
    • 7", Wet or Dry, 8,500 RPM Max
    • 8", Wet Use Only, 7,500 RPM Max
    • 10", Wet Use Only, 6,000 RPM Max
    • 12", Wet or Dry, 6,200 RPM Max
    • 14", Wet or Dry, 4,500 RPM max, Cut Granite, Marble and other Hard Material

Talon™ Marble Blades

Talon Marble Blades

Our premium, dry-cutting Talon™ Marble Blade is designed to cut super fast and chip-free on medium to softer grades of marble, limestone, travertine and other soft stones. Talon™ Marble Blades are our #1 selling small blade for these stones. This versatile blade can be use with a grinder or on a small saw. Talon™ Marble blades can be used wet or dry. 

  • Fast, chip-free cutting
  • For medium to softer grades of marble and other soft stones
  • All blades except for 4" have Quad Holes
  • Wet or Dry use
  • Available in:
    • 4", 13,700 RPM Max
    • 4-1/2", Quad Hole, 13,300 RPM Max
    • 5", Quad Hole, 12,200 RPM Max
    • 6", Quad Hole, 10,000 RPM Max
    • 7", Quad Hole, 8,500 RPM Max

Talon™ Flush Cut, Quad Hole Marble Blades

Talon Flush Cut, Quad Hole Marble Blades

Braxton-Bragg offers the best in Marble Blades.  Marble diamond saw blades have an electroplated design. This insures that marble can be cut smoothly, without chipping or ripping the material. You can optimize the marble blade's cutting performance when cutting marble or other soft stone such as travertine and limestone, by using a small tile or stone saw, like the Skilsaw.

The Talon Quad Flush Cut Marble Blade is ideal for cutting marble, travertine, limestone and other soft stone. This blade works perfect on a saw or grinder and can be used wet or dry. Talon Quad Flush Cut Blade can be used with a flush cut adapter to allow for cutting and grinding in tight areas, such as corner cuts or in the sculpting process. Talon blades lead the industry in quality and pricing. 

  • Designed for cutting marble, travertine, limestone, and other soft stones
  • Has both 20mm-5/8 arbor and quad holes
  • Made with more electroplated diamonds for long blade life
  • Efficient in flush cutting/grinding applications
  • Wet or Dry use
  • Available in:
    • 4-1/2" x 20mm-5/8-11 Arbor, 13,000 RPM Max
    • 5" x 20mm-5/8-11 Arbor, 13,300 RPM Max

Talon™ Diamond Contour Saw Blade for Marble

Talon Diamond Contour Saw Blade for Marble

Contour Blades are designed to make radius cuts in stone and are ideal for bowl holes. The dish shaped design reduces the possibility of binding and kickback. 

Contour Blades come in several unique designs: turbo, segmented and electroplated.

The turbo design is smooth cutting and reduces chipping. This design of blade is ideal for hard marble or granites.

The segmented design is the most popular design because it is very aggressive. This blade works best with hard material, such as granite and engineered stone.

Electroplated blades are designed for cutting soft stone, such as marble or travertine. It will provide a chip-free cut. 

Turn your SkilSaw into a sink cut out system with our new contour blade adapter.

The Talon Contour blade is designed specifically for cutting sink holes and other curved applications when working with softer stones like marble, travertine and limestone.  

The side diamonds protect the rim diamonds and core from wear. This design reduces kickback and binding. These also add to speed of cut and life of the blade.  

For the easiest and safest way to make curved cuts try the Skilsaw Wet Stone Cutter and Contour Blade Adapter.

  • For Soft Stone Including Marble & Travertine
  • Wet or Dry use
  • Electroplated diamonds
  • Smooth, chip free cut
  • Side diamonds 
  • Available in:
    • 5", 12,000 RPM Max.

Talon™ Flush Cut Diamond Saw Blades

Talon Flush Cut Diamond Saw Blades

Flush Cut Blades are designed for fast, aggressive cutting. The use of flush cut blades with the Flush Cut Adapter or flange allows flush grinding with the blade because it extends the blade past the spindle or arbor. 

  • Aggressive cutting and grinding
  • Extended “T” segment on both sides of blade
  • Designed to be used to grind and shape stone
  • Dry or wet use
  • Quad hole allow for inside corner cut & clean up & notching
  • Ideal for cutting, grinding & shaping granite, marble & other natural & engineered stone
  • Available in:
    • 4-1/2" x 7.0mm x 4mm x 20, 5/8" + Quad Holes, Diamonds on Both Sides, 13,300 RPM Max
    • 5" x 7.0mm x 4mm x 20, 5/8" + Quad Holes, Diamonds on Both Sides, 12,000 RPM Max
    • 7" x 7.0mm x 4mm x 20, 7/8" + Quad Holes, Diamonds on Both Sides, 12,000 RPM Max

Talon™ Platinum Diamond Rodding Blades

Talon Platinum Diamond Rodding Blades

Rodding blades cut a thick slot in granite to allow steel or fiberglass rodding material to be inserted and glued with flowing epoxy adhesive.  This is used to reinforce the area around sink cut outs.

Rodding material not only adds strength to stone, but more importantly, it strengthens your good name.

Talon™ Platinum Rodding Blades are designed for use on natural stone, even the hardest, and do so in record time and with less effort.

The wide segmented design allows captured air to cool the blade, as well as allowing for aggressive material removal.

Talon™  Platinum is premium quality at the best price.

  • Use on all natural stone
  • Perfect for cutting rodding channel for steel or fiberglass rods
  • Available in:
    • 3" x 1/8", 15,000 RPM Max
    • 3" x 1/4", 15,000 RPM Max
    • 3" x 3/8", 15,000 RPM Max
    • 4" x 5/16", 14,200 RPM Max
    • 4" x 3/8", 14,200 RPM Max
    • 4-1/2" x 5/16", 13,300 RPM Max
    • 4-1/2" x 3/8", 13,300 RPM Max
    • 5" x 5/16", 12,000 RPM Max
    • 5" x 3/8", 12,000 RPM Max

 

Bridge Saw Blades are designed to be used wet.  Length of life depends on type of material sawn and the technology of the blade. 

Blade segments vary in design from the height of the segments to the type of diamond layering technology used.

If you are having difficulty with your cutting process, make sure you have the correct size blade to match the RPM of your saw. Here is the formula to calculate using the s.f.p.m. (surface feet per minute): 

  • S.F.P.M.= Pi x RPM x Blade Diameter

  • Granite  S.F.P.M. is 4,500 to 6,500
  • Engineered Stone S.F.P.M is 4,500 to 6,500
  • Marble S.F.P.M is 6,000 to 8,500
  • Limestone S.F.P.M. is 7,500 to 10,000

Talon™ Array 26mm Silent Core Diamond Bridge Saw Blades

Talon Array 26mm Silent Core Diamond Bridge Saw Blades

Talon Array 26mm features the industry's largest segments

Talon Array 26mm Silent Core Blades are designed to cut granite and other hard stones. Talon Array blades will cut granite smoothly and with minimal chipping and provide a consistent cut. Having a smooth starting point after your material is taken from the bridge saw means less steps to achieve your goal. 

Cutting Edge Array Technology means that the diamonds used on the Talon™ Array blade are evenly spaced to provide the same quality cut from the 1st use of the blade to the last use. 

Note: Can be used on a high or low horsepower saw.

Cutting Edge Array Technology

The cutting speed of this Talon blade is equal to any blade on the market. Braxton-Bragg guarantees 100% that this blade will meet all of your cutting expectations. This new blade sets the standard for diamond bridge saw blades. Using the newest technology, these blades cut even the hardest stone without causing your saw to draw increased amps.

  • Ideal for Use on Granite, Hard Marbles & Engineered Stone.
  • Array layered diamond technology
  • 26mm tall segments
  • For use on 10 horsepower and larger saws
  • Evenly spaced quality diamonds produce a smooth chip-free cut
  • Wet use only
  • Ideal for granite, hard marbles and engineered stone
  • Available in:
    • 12", 26mm Segments, 50/60mm Arbor
    • 14", 26mm Segments, 50/60mm Arbor
    • 16", 26mm Segments, 50/60mm Arbor
    • 18", 26mm Segments, 50/60mm Arbor
    • 20", 26mm Segments, 50/60mm Arbor

Talon™ Sandwich Segment Diamond Bridge Saw Blade

Talon Sandwich Segment Diamond Bridge Saw Blade

  • Mega-segment height
  • Layered segments
  • Blade will never need dressing
  • Blade will cut ALL THE WAY TO THE CORE*
  • Silent core for noise reduction
  • Cuts granite smoothly and without chipping
  • Incredible blade life
  • 18mm segments
  • Available in:
    • 14", 4,500 RPM max
    • 16", 3,800 RPM max

 *Can be bushed to any size arbor that your saw requires.


Talon™ Primo Granito Diamond Bridge Saw Blades

Talon Primo Granito Diamond Bridge Saw Blades

  • 9.5mm segment
  • For use on horsepower saws 3hp and larger
  • Smooth chip-free cut
  • Wet use only
  • Available in:
    • 12", 2.8 x 40 x 9.5mm, 6,000 RPM max
    • 14", 3.0 x 40 x 9.5mm, 4,500 RPM max
    • 16", 3.4 x 40 x 9.5mm, 3,800 RPM max
    • 18", 3.8 x 40 x 9.5mm, 3,400 RPM max
    • 20", 4.2 x 40 x 9.5mm, 3,000 RPM max